{"id":623,"date":"2014-01-15T22:36:00","date_gmt":"2014-01-15T22:36:00","guid":{"rendered":"http:\/\/pdp2011.sytse.net\/wordpress\/?page_id=623"},"modified":"2014-01-15T22:36:00","modified_gmt":"2014-01-15T22:36:00","slug":"install-2","status":"publish","type":"page","link":"https:\/\/pdp2011.sytse.net\/wordpress\/pdp-11\/sessions\/rsx-11m-plus\/install-2\/","title":{"rendered":"Install 2"},"content":{"rendered":"

In this step, I’ll be adding Decnet support to the RSX11M-Plus installation on the RP06 disk. The software was already on the RD54 image copied in the first step, so there’s no need to mess around with tapes.
\nHere goes:
\n
\npdp11 run<\/strong><\/code>
\nPDP-11 simulator V3.9-0
\nDisabling XQ
\nsim> boot rp0<\/strong>
\nRSX-11M-PLUS V4.6 BL87 1024.KW System:”RSXMPL”
\n>RED DB:=SY:
\n>RED DB:=LB:
\n>RED DB:=SP:
\n>MOU DB0:”RSX11MPBL87″
\n>@DB:[1,2]STARTUP
\n>; PLEASE NOTE
\n>;
\n>; If you have not yet read the system release notes, please do so
\n>; now before attempting to perform a SYSGEN or to utilize the new
\n>; features of this system.
\n>;
\nZ[c
\nSET — Inquire cannot determine terminal type
\n>;
\n>; Please ignore any random characters that may have printed on your
\n>; terminal just now. They came from a SET \/INQUIRE=TI: command.
\n>; Evidently your terminal does not recognize escape sequences.
\n>; This will not affect the running of this command file.
\n>;
\n>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: 22:33 15-jan-14<\/strong>
\n>TIME 22:33 15-jan-14
\n>ACS SY:\/BLKS=1024.
\n>CON ONLINE ALL
\n>ELI \/LOG\/LIM
\n>CLI \/INIT=DCL\/CTRLC\/DPR=”<15><12>\/$ \/”
\n>INS LB:[1,1]RMSRESAB.TSK\/RON=YES\/PAR=GEN
\n>INS LB:[1,1]RMSLBL.TSK\/RON=YES\/PAR=GEN
\n>INS LB:[1,1]RMSLBM.TSK\/RON=YES\/PAR=GEN
\n>INS $QMGCLI
\n>INS $QMGCLI\/TASK=…PRI
\n>INS $QMGCLI\/TASK=…SUB
\n>QUE \/START:QMG
\n>INS $QMGPRT\/TASK=PRT…\/SLV=NO
\n>QUE LP0:\/CR\/NM
\n>START\/ACCOUNTING
\n>CON ESTAT LP0:
\n>QUE BAP0:\/BATCH
\n>QUE BAP0:\/AS:BATCH
\n>@ <EOF>
\n>set \/uic=[137,10]<\/strong>
\n>@netgen<\/strong>
\n>;
\n>; =====================================================================
\n>; NET – RSX-11M-PLUS CEX System Generation Procedure
\n>; Started at 22:33:24 on 15-JAN-14
\n>; =====================================================================
\n>;
\n>; Copyright (c) 1996,1997,1998 by Mentec, Inc., U.S.A.
\n>; All rights reserved
\n>;
\n>; Generate a CEX System, Version 04.06, for your RSX-11M-PLUS target system.
\n>;
\n>; The following CEX Products may be generated
\n>; DECnet
\n>;
\n>; The distribution kits must be up to the current patch level. If
\n>; necessary, you should stop the generation and apply the necessary
\n>; patches.
\n>;
\n>; The logical device name LB: should already be assigned to the device
\n>; which contains the library files for the system you are generating.
\n>; These files are EXELIB.OLB, EXEMC.MLB, RSXMAC.SML, SYSLIB.OLB and
\n>; NOANSLIB.OLB for RSX-11M-PLUS and 11SLIB.OLB for RSX-11S.
\n>;
\n>; The logical device names IN:, OU:, LS: and MP: should not be assigned
\n>; to any devices before starting the generation. These logical device
\n>; names are used by NETGEN to refer to various disks used during the
\n>; generation.
\n>;
\n>;
\n>; <EOS> Do you want to:
\n>* <RET>-Continue, E-Exit [S]:
\n>;
\n>;
\n>; ====================================================================
\n>; NETGEN Disk contains NO DECNET AUTOPATCH corrections
\n>; ====================================================================
\n>;
\n>; =====================================================================
\n>; NET – Section 1 – General Initialization
\n>; =====================================================================
\n>;
\n>* 01.00 Do you want to see the NETGEN notes\/cautions [D=N]? [Y\/N]:
\n>* 02.00 Target system device [dduu, D=SY:] [S]:
\n>* 03.00 Listing\/map device [dduu, D=None] [S]:
\n>* 04.00 UIC Group Code for NETGEN output [O R:1-377 D:5]:
\n>;
\n>; Checking for required tasks and UICs.
\n>;
\n>;
\n>; Creating UFD for SY:[005,001]
\n>; Creating UFD for SY:[005,010]
\n>;
\n>; 07.00 User ID to be used to identify your new responses
\n>* [D=None] [S R:0.-30.]:
\n>* 08.00 Is this generation to be a dry run [D=N]? [Y\/N]:
\n>* 09.00 Do you want a standard function network [D=N]? [Y\/N]: y<\/strong>
\n>* 11.00 Should old files be deleted [D=N]? [Y\/N]: y<\/strong>
\n>;
\n>; <EOS> Do you want to:
\n>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
\n>;
\n>;
\n>; =====================================================================
\n>; NET – Section 2 – Define the target system
\n>; =====================================================================
\n>;
\n>* 02.00 RSXMC.MAC location (ddu:[g,m], D=SY:[011,010]) [S]:
\n>;
\n>; SY00:[011,010]RSXMC.MAC is being copied to SY:[005,010]RSXMC.MAC
\n>;
\n>; SY:[005,010]RSXMC.MAC is being scanned to define your target system.
\n>; This may take up to several minutes.
\n>;
\n>; The target is an RSX-11M-PLUS system, with…
\n>; A 20K-Executive
\n>; Kernel data space enabled
\n>; Extended memory support (more than 124K words of memory)
\n>; Multi-user protection
\n>; Extended instruction set (EIS)
\n>; Powerfail recovery support
\n>; Dynamic task checkpoint allocation
\n>; PLAS support
\n>; Queue Manager (QMG) support
\n>;
\n>; Creating UFD for SY:[005,024]
\n>; Creating UFD for SY:[005,054]
\n>;
\n>* 04.00 RSX11M.STB location (ddu:[g,m], D=SY00:[001,054]) [S]:
\n>;
\n>; SY00:[001,054]RSX11M.STB is being copied to SY:[005,054]RSX11M.STB
\n>;
\n>;
\n>; Checking for required library files and tasks.
\n>;
\n>* 05.00 Should tasks link to the Supervisor Mode FCS library [D=N]? [Y\/N]:
\n>* 06.00 Should tasks link to the Memory Resident FCS library [D=N]? [Y\/N]: y<\/strong>
\n>;
\n>; The DECnet CEX Product will be generated.
\n>;
\n>; Only non-routing nodes can be generated from your distribution kit.
\n>;
\n>;
\n>; <EOS> Do you want to:
\n>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
\n>;
\n>;
\n>; =====================================================================
\n>; NET – Section 3 – Define the system lines
\n>; =====================================================================
\n>;
\n>* 01.00 Device Driver Process name [<RET>=Done] [S R:0-3]: una<\/strong>
\n>* 02.00 How many UNA controllers are there [D R:1.-16. D:1.]:
\n>;
\n>* 03.01 CSR address for UNA-0 [O R:160000-177777 D:174510]:
\n>* 03.02 Vector address for UNA-0 [O R:0-774 D:120]:
\n>* 03.03 Device priority for UNA-0 [O R:4-6 D:5]:
\n>;
\n>* 04.07 Set the state for UNA-0 ON when loading the network [D=N]? [Y\/N]: y<\/strong>
\n>;
\n>* 01.00 Device Driver Process name [<RET>=Done] [S R:0-3]:
\n>;
\n>;
\n>; <EOS> Do you want to:
\n>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
\n>;
\n>;
\n>; =====================================================================
\n>; NET – Section 4 – Define the CEX System
\n>; =====================================================================
\n>;
\n>; Creating build files for AUX, the CEX Auxillary routine.
\n>;
\n>; Creating build files for CETAB, the CEX configuration tables.
\n>;
\n>; Creating build files for the DDMs, the device driver modules.
\n>;
\n>; UNA
\n>;
\n>;
\n>; <EOS> Do you want to:
\n>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
\n>;
\n>;
\n>; =====================================================================
\n>; NET – Section 5 – Define the Comm Exec Support Components
\n>; =====================================================================
\n>;
\n>; Creating build files for NTINIT, the network initializer.
\n>;
\n>; Creating build files for NTL, the network loader.
\n>;
\n>; Creating build files for MLD, the general microcode loader.
\n>;
\n>; Creating build files for EVL\/EVC, the event logger and collector.
\n>;
\n>; EVL will use 6. event buffers.
\n>;
\n>; =====================================================================
\n>; NET – Section 6 – Define the System Management Utilities
\n>; =====================================================================
\n>;
\n>; Creating build files for NCP, the network control program.
\n>;
\n>; Creating build files for NMVACP and NMDRV, the Network Management
\n>; Volatile ACP and driver.
\n>;
\n>; Creating build files for CFE, the configuration file editor.
\n>;
\n>; Creating build files for NDA, the network dump analyzer.
\n>;
\n>; Creating build files for VNP, the virtual network control program.
\n>;
\n>; Creating build files for LOO, the loop test sender task.
\n>;
\n>; Creating build files for EVF, the event file interpreter program.
\n>;
\n>;
\n>; =====================================================================
\n>; NET – Section 7 – Define the CEX Products
\n>; =====================================================================
\n>;
\n>; Questions concerning the following CEX Products will now be asked.
\n>;
\n>; DECnet
\n>;
\n>;
\n>; =====================================================================
\n>; DEC – DECnet CEX Product Generation Procedure
\n>; Starting questions at 22:35:45 on 15-JAN-14
\n>; =====================================================================
\n>;
\n>; Copyright (c) 1996,1997,1998 by Mentec, Inc., U.S.A.
\n>; All rights reserved
\n>;
\n>; Generate the DECnet CEX Product for your RSX-11M-PLUS target
\n>; System.
\n>;
\n>; =====================================================================
\n>; DEC – Section 1 – Define the target and remote nodes
\n>; =====================================================================
\n>;
\n>* 01.00 What is the target node name [S R:0-6]: de0n<\/strong>
\n>* 02.00 What is the target node address [S R:0.-8.]: 1.19<\/strong>
\n>* 03.00 Target node ID [D=None] [S R:0.-32.]: de0nano<\/strong>
\n>;
\n>; Node type is non-routing
\n>;
\n>; Extended network support for network command terminals and products
\n>; layered on DECnet, will be included.
\n>;
\n>* 07.00 Remote node name [<RET>=Done] [S R:0-6]:
\n>;
\n>; The DECnet MACRO user library and FORTRAN\/COBOL\/BASIC+2 library will
\n>; be included.
\n>;
\n>; The DECnet MACRO user library will be placed on your target disk
\n>; as “SY:[1,1]NETLIB.MLB”.
\n>;
\n>; The DECnet FORTRAN\/COBOL\/BASIC+2 object library will be placed on your
\n>; target disk as “SY:[1,1]NETFOR.OLB”.
\n>;
\n>; If necessary, please move them to the library disk (LB:) on your
\n>; target system, if this is different from your target disk (SY:).
\n>;
\n>;
\n>; <EOS> Do you want to:
\n>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
\n>;
\n>;
\n>; =====================================================================
\n>; DEC – Section 2 – Define the DECnet Communications Components
\n>; =====================================================================
\n>;
\n>; Creating build files for XPT, the routing process.
\n>;
\n>; Creating build files for ECL, the network services process and driver.
\n>;
\n>; Creating build files for NETACP, the network services ACP.
\n>;
\n>; NETACP will be checkpointable.
\n>;
\n>; Creating build files for EPM, the Ethernet protocol manager process.
\n>;
\n>; =====================================================================
\n>; DEC – Section 3 – Define the DECnet Network Management Components
\n>; =====================================================================
\n>;
\n>; Creating build files for NICE, the network information and control
\n>; server task.
\n>;
\n>; Creating build files for EVR, the network event receiver task.
\n>;
\n>; Creating build files for NTD, the node state display task.
\n>;
\n>; Creating build files for NTDEMO, the node state display server task.
\n>;
\n>; Creating build files for LIN, the link watcher task.
\n>;
\n>; Creating build files for MIR, the loop test mirror task.
\n>;
\n>; Creating build files for NVP, the network connect verification task.
\n>;
\n>; Creating build files for SCP, the node name server control task.
\n>;
\n>; Creating build files for NNC, the node name collector task.
\n>;
\n>; Creating build files for NNS, the node name server.
\n>;
\n>;
\n>; =====================================================================
\n>; DEC – Section 4 – Define the DECnet Satellite Support Components
\n>; =====================================================================
\n>;
\n>* 02.00 Do you want the Satellite Support Components [D=N]? [Y\/N]:
\n>;
\n>; <EOS> Do you want to:
\n>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
\n>;
\n>;
\n>; =====================================================================
\n>; DEC – Section 5 – Define the DECnet File Utilities
\n>; =====================================================================
\n>;
\n>; Creating build files for NFT, the network file access user task.
\n>;
\n>; Creating build files for FTS, the network file access spooler
\n>; user task.
\n>;
\n>; Creating build files for FAL, the network file access server.
\n>;
\n>; FAL will support RMS file access.
\n>; FAL will be a multi-copy object.
\n>; FAL will not be overlaid.
\n>; FAL will use the memory resident RMS library.
\n>; FAL user data buffer size will be 2048 bytes.
\n>;
\n>; Creating build files for MCM, the network command or batch file
\n>; submission server.
\n>;
\n>; MCM requests will be queued to BATCH.
\n>;
\n>; =====================================================================
\n>; DEC – Section 6 – Define the DECnet Terminal and Control Utilities
\n>; =====================================================================
\n>;
\n>; Creating build files for RMT and RMTACP, the remote network terminal
\n>; task and ACP.
\n>;
\n>; The maximum number of simultaneous RMT users is 4.
\n>;
\n>; Creating build files for HT: and RMHACP, the remote network terminal
\n>; driver and ACP.
\n>;
\n>; RMHACP will support 4 simultaneous incoming connections.
\n>; HTDRV will support 4 HT: units.
\n>;
\n>; Creating build files for NCT, the network command terminal server
\n>;
\n>; Creating build files for RTH, the network command terminal host
\n>; support.
\n>;
\n>; Creating build files for TLK, the remote talk user task.
\n>;
\n>; Creating build files for LSN, the remote talk server task.
\n>;
\n>; Creating build files for PHO, the inter-terminal conversation utility.
\n>;
\n>; Creating build files for LAT\/LCP, the Local Area Transport terminal
\n>; service process and LAT Control Program
\n>;
\n>; Creating build files for TCL, the remote task control server task.
\n>;
\n>;
\n>; =====================================================================
\n>; DEC – DECnet CEX Product Generation Procedure
\n>; DECnet question\/answer section completed at 22:37:02 on 15-JAN-14
\n>; =====================================================================
\n>;
\n>;
\n>; =====================================================================
\n>; NET – Section 8 – Complete the CEX System Definitions
\n>; =====================================================================
\n>;
\n>; Creating build files for DLX, the Direct Line Access process.
\n>;
\n>* 02.00 What is the Large Data Buffer (LDB) size [D R:576.-1484. D:576.]:
\n>;
\n>; <EOS> Do you want to:
\n>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
\n>;
\n>;
\n>; =====================================================================
\n>; NET – Section 9 – Build the CEX System at 22:37:19 on 15-JAN-14
\n>; =====================================================================
\n>;
\n>; All questions have now been asked and the selected components will now
\n>; be built. This may take from one to three hours, depending on the
\n>; selection of components and the system you are running on.
\n>;
\n>PIP SY:[005,054]CETAB.MAC\/PU\/NM
\n>PIP SY:[005,054]AUX.DAT\/PU\/NM
\n>;
\n>SET \/UIC=[1,2]
\n>PIP OU:[1,2]NETHLP.ULB=IN:[1,2]NETHLPD.HLP
\n>PIP OU:[1,2]NETHLP.ULB\/PU\/NM
\n>SET \/UIC=[005,024]
\n>;
\n>PIP OU:[5,54]\/NV=IN:[3,54]RSXVEC.STB
\n>PIP OU:[5,54]\/NV\/CO=IN:[131,54]AUX.TSK
\n>PIP OU:[5,54]\/NV=IN:[131,54]AUX.STB
\n>PIP OU:[5,54]AUX.TSK\/PU\/NM,AUX.STB
\n>MAC @OU:[5,24]CETABASM.CMD
\n>PIP OU:[5,24]CETAB.OBJ\/PU\/NM
\n>TKB @OU:[5,24]CETABBLD.CMD
\n>PIP OU:[5,54]CETAB.TSK\/PU\/NM,CETAB.STB
\n>PIP OU:[5,54]\/NV\/CO=IN:[132,54]NTINIT.TSK
\n>PIP OU:[5,54]NTINIT.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[132,54]NTL.TSK
\n>PIP OU:[5,54]NTL.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[132,54]MLD.TSK
\n>PIP OU:[5,54]\/NV=IN:[132,54]MLD.STB
\n>PIP OU:[5,54]MLD.TSK\/PU\/NM,MLD.STB
\n>MAC @OU:[5,24]EVLASM.CMD
\n>PIP OU:[5,24]EVLDAT.OBJ\/PU\/NM
\n>TKB @OU:[5,24]EVLBLD.CMD
\n>PIP OU:[5,54]\/NV=IN:[131,24]EVL.DAT
\n>PIP OU:[5,54]EVL.TSK\/PU\/NM,EVL.STB,EVL.DAT
\n>TKB @OU:[5,24]EVCBLD.CMD
\n>PIP OU:[5,54]EVC.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]NCPRES.TSK
\n>PIP OU:[5,54]NCPRES.TSK\/PU\/NM
\n>MAC @OU:[5,24]NMVACPASM.CMD
\n>PIP OU:[5,24]NMDRV.OBJ\/PU\/NM,NMTAB.OBJ
\n>TKB @OU:[5,24]NMVACPBLD.CMD
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]NMVACP.TSK
\n>PIP OU:[5,54]\/NV=IN:[135,54]NMVACP.STB
\n>PIP OU:[5,54]NMVACP.TSK\/PU\/NM,NMDRV.TSK,NMDRV.STB
\n>PIP OU:[5,54]\/NV\/CO=IN:[132,54]CFERES.TSK
\n>PIP OU:[5,54]CFERES.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[141,54]NDA.TSK
\n>PIP OU:[5,54]NDA.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[132,54]VNP.TSK
\n>PIP OU:[5,54]VNP.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]LOO.TSK
\n>PIP OU:[5,54]\/NV=IN:[135,54]LOO.STB
\n>PIP OU:[5,54]LOO.TSK\/PU\/NM,LOO.STB
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]EVFRES.TSK
\n>PIP OU:[5,54]EVFRES.TSK\/PU\/NM
\n>MAC @OU:[5,24]DLXASM.CMD
\n>PIP OU:[5,24]DLXTAB.OBJ\/PU\/NM
\n>TKB @OU:[5,24]DLXBLD.CMD
\n>PIP OU:[5,54]DLX.DAT\/NV=IN:[131,24]DLX.DAT
\n>PIP OU:[5,54]DLX.TSK\/PU\/NM,DLX.STB,DLX.DAT
\n>PIP OU:[5,54]DLXTAB.TSK\/PU\/NM,DLXTAB.STB
\n>;
\n>TKB @OU:[5,24]UNABLD.CMD
\n>PIP OU:[5,54]UNA.TSK\/PU\/NM,UNA.STB
\n>PIP OU:[5,54]\/NV=IN:[131,24]UNA.DAT
\n>PIP OU:[5,54]UNA.DAT\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[131,54]UNAMC.TSK
\n>PIP OU:[5,54]UNAMC.TSK\/PU\/NM
\n>SET \/UIC=[1,1]
\n>PIP OU:[1,1]NETLIB.MLB\/NV=IN:[1,10]NETLIBU.MLB
\n>PIP OU:[1,1]NETLIB.MLB\/PU
\n>LBR OU:[1,1]NETFOR.OBS=IN:[133,24]DAPFOR\/EX
\n>LBR OU:[1,1]NETTMP.OBS=IN:[133,24]DAPTRC\/EX
\n>LBR OU:[1,1]NETFOR\/CO:1:320.:192.=IN:[134,24]NETFOR.OLB
\n>LBR OU:[1,1]NETFOR\/IN=OU:[1,1]NETFOR.OBS
\n>LBR OU:[1,1]NETFOR\/IN\/-EP=OU:[1,1]NETTMP.OBS
\n>LBR OU:[1,1]NETFOR\/DG:$MBLUN:$ASTBL:$ASTLU
\nEntry points deleted:
\n$MBLUN
\n$ASTBL
\n$ASTLU
\n>PIP OU:[1,1]NETFOR.OBS;*\/DE,NETTMP.OBS;*
\n>PIP OU:[1,1]NETFOR.OLB\/PU
\n>SET \/UIC=[005,024]
\n>PIP OU:[005,024]\/NV=IN:[137,24]NTEST.CMD
\n>PIP OU:[005,024]NTEST.CMD\/PU\/NM
\n>SET \/UIC=[005,054]
\n>PIP OU:[005,054]\/NV\/CO=IN:[133,54]DTS.TSK,DTR.TSK
\n>PIP OU:[005,054]DTS.TSK\/PU\/NM,DTR.TSK
\n>SET \/UIC=[005,024]
\n>TKB @OU:[5,24]XPTBLD.CMD
\n>PIP OU:[5,54]XPT.DAT\/NV=IN:[131,24]XPT.DAT
\n>PIP OU:[5,54]XPT.TSK\/PU\/NM,XPT.STB,XPT.DAT
\n>MAC @OU:[5,24]ECLASM.CMD
\n>PIP OU:[5,24]ECLTAB.OBJ\/PU\/NM
\n>TKB @OU:[5,24]ECLBLD.CMD
\n>PIP OU:[5,54]ECL.DAT\/NV=IN:[131,24]ECL.DAT
\n>PIP OU:[5,54]ECL.TSK\/PU\/NM,ECL.STB,ECLTAB.TSK,ECLTAB.STB,ECL.DAT
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]PROXY.TSK
\n>TKB @OU:[5,24]NETACPBLD.CMD
\n>PIP OU:[5,54]NETACP.TSK\/PU\/NM,NETACP.STB
\n>TKB @OU:[5,24]EPMBLD.CMD
\n>PIP OU:[5,54]\/NV=IN:[131,24]EPM.DAT,EPMST.DAT
\n>PIP OU:[5,54]EPM.TSK\/PU\/NM,EPM.STB,EPM.DAT,EPMST.DAT
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]NICE.TSK
\n>PIP OU:[5,54]NICE.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]EVR.TSK
\n>PIP OU:[5,54]EVR.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]NTD.TSK
\n>PIP OU:[5,54]NTD.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]NTDEMO.TSK
\n>PIP OU:[5,54]NTDEMO.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]LIN.TSK
\n>PIP OU:[5,54]LIN.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]MIR.TSK
\n>PIP OU:[5,54]\/NV=IN:[135,54]MIR.STB
\n>PIP OU:[5,54]MIR.TSK\/PU\/NM,MIR.STB
\n>PIP OU:[5,54]\/NV\/CO=IN:[132,54]NVP.TSK
\n>PIP OU:[5,54]NVP.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[165,54]SCPRES.TSK
\n>PIP OU:[5,54]SCPRES.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[161,54]NNCRES.TSK
\n>PIP OU:[5,54]NNCRES.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[162,54]NNDRV.TSK,NNDRV.STB,NNS.TSK,IN:[162,24]NNS.DAT
\n>PIP OU:[5,54]NNDRV.TSK,NNDRV.STB,NNS.TSK,NNS.DAT\/PU\/NM
\n>TKB @OU:[5,24]NFTBLD.CMD
\n>PIP OU:[5,54]NFTRES.TSK\/PU\/NM
\n>SET \/UIC=[5,24]
\n>MAC @OU:[5,24]FTSASM.CMD
\n>TKB @OU:[5,24]FTSBLD.CMD
\n>PIP OU:[5,54]FTSRES.TSK\/PU\/NM,FTSDEQRES.TSK
\n>SET \/UIC=[5,24]
\n>MAC @OU:[5,24]FALASM.CMD
\n>PIP OU:[5,24]FALPRM.OBJ\/PU\/NM
\n>TKB @OU:[5,24]FALBLD.CMD
\n>PIP OU:[5,54]FAL.TSK\/PU\/NM,FALRES.TSK,FALFSL.TSK
\n>TKB @OU:[5,24]MCMBLD.CMD
\n>PIP OU:[5,54]MCM.TSK\/PU\/NM
\n>MAC @OU:[5,24]RMTASM.CMD
\n>PIP OU:[5,24]RMTACP.OBJ\/PU\/NM
\n>TKB @OU:[5,24]RMTBLD.CMD
\n>PIP OU:[5,54]RMT.TSK\/PU\/NM,RMTACP.TSK
\n>MAC @OU:[5,24]RMHACPASM.CMD
\n>PIP OU:[5,24]RMHACP.OBJ\/PU\/NM,HTTAB.OBJ
\n>TKB @OU:[5,24]RMHACPBLD.CMD
\n>PIP OU:[5,54]RMHACP.TSK\/PU\/NM,HTDRV.TSK,HTDRV.STB
\n>PIP OU:[5,54]\/NV\/CO=IN:[140,54]TRXCTL.TSK
\n>PIP OU:[5,54]\/NV\/CO=IN:[140,54]TRXCOL.TSK
\n>PIP OU:[5,54]TRXCTL.TSK\/PU\/NM
\n>PIP OU:[5,54]TRXCOL.TSK\/PU\/NM
\n>TKB @OU:[5,24]NCTBLD.CMD
\n>PIP OU:[5,54]NCT.DAT\/NV=IN:[140,24]NCT.DAT
\n>PIP OU:[5,54]NCT.TSK\/PU\/NM,NCT.STB,NCT.DAT
\n>PIP OU:[5,54]NCT1.TSK\/PU\/NM,NCT1.STB
\n>PIP OU:[5,54]NCTCTL.TSK\/PU\/NM
\n>MAC @OU:[5,24]RTHASM.CMD
\n>TKB @OU:[5,24]RTHBLD.CMD
\n>PIP OU:[5,24]RTHTAB.OBJ\/PU\/NM
\n>PIP OU:[5,54]RTH.DAT\/NV=IN:[140,24]RTH.DAT
\n>PIP OU:[5,54]RTH.TSK\/PU\/NM,RTH.STB,RTH.DAT
\n>PIP OU:[5,54]RTHTAB.TSK\/PU\/NM,RTHTAB.STB
\n>TKB @OU:[5,24]TLKBLD.CMD
\n>PIP OU:[5,54]TLKRES.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[133,54]LSN.TSK
\n>PIP OU:[5,54]LSN.TSK\/PU\/NM
\n>PIP OU:[5,54]\/NV\/CO=IN:[133,54]PHONE.TSK
\n>PIP OU:[5,54]PHONE.TSK\/PU\/NM
\n>SET \/UIC=[1,2]
\n>PIP OU:[1,2]\/NV=IN:[133,10]PHONEHELP.HLP
\n>PIP OU:[1,2]PHONEHELP.HLP\/PU
\n>SET \/UIC=[5,24]
\n>PIP OU:[5,54]\/NV\/CO=IN:[135,54]LCP.TSK
\n>PIP OU:[5,54]\/NV\/CO=IN:[131,54]LAT.TSK,LAT.STB
\n>PIP OU:[5,54]\/NV\/CO=IN:[131,54]LAT1.TSK,LAT1.STB
\n>PIP OU:[5,54]\/NV\/CO=IN:[131,54]LTD.TSK,LTD.STB
\n>PIP OU:[5,54]\/NV\/CO=IN:[131,54]LTD1.TSK,LTD1.STB
\n>PIP OU:[5,54]LAT.DAT\/NV=IN:[131,24]LAT.DAT
\n>PIP OU:[5,54]LTD.DAT\/NV=IN:[131,24]LTD.DAT
\n>PIP OU:[5,54]LAT.TSK\/PU\/NM,LAT.STB,LAT.DAT
\n>PIP OU:[5,54]LAT1.TSK\/PU\/NM,LAT1.STB
\n>PIP OU:[5,54]LTD.TSK\/PU\/NM,LTD.STB
\n>PIP OU:[5,54]LTD1.TSK\/PU\/NM,LTD1.STB
\n>PIP OU:[5,54]LTD.DAT\/PU\/NM
\n>PIP OU:[5,54]LCP.TSK\/PU\/NM
\n>MAC @OU:[5,24]TCLASM.CMD
\n>PIP OU:[5,24]TCLPWD.OBJ\/PU\/NM
\n>TKB @OU:[5,24]TCLBLD.CMD
\n>PIP OU:[5,54]TCL.TSK\/PU\/NM
\n>;
\n>; =====================================================================
\n>; NET – Section 10 – Generation Clean Up
\n>; =====================================================================
\n>;
\n>; Creating NETCFG.TXT, the network configuration description file.
\n>; Creating NETCFE.CMD, the network configuration command file.
\n>; Creating NETINS.CMD, the network installation command file.
\n>; Creating NETREM.CMD, the network removal command file.
\n>;
\n>;
\n>; The network HELP file library has been placed on your target disk, as:
\n>;
\n>; SY:[1,2]NETHLP.ULB
\n>;
\n>; This file should be moved to your target systems library device (LB:).
\n>;
\n>;
\n>; =====================================================================
\n>; NET – RSX-11M-PLUS CEX System Generation Procedure
\n>; Stopped at 22:37:33 on 15-JAN-14
\n>; =====================================================================
\n>;
\n>@ <EOF>
\n>run $shutup<\/strong>
\nRSX-11M-PLUS Shut down program
\nEnter minutes to wait before shutdown: 0<\/strong>
\nReason for shutdown (<CR> for none):
\nOK to shutdown? [Y\/N]: y<\/strong>
\nAll further logins are disabled
\n15-JAN-14 22:38 System is now shutting down — RSXMPL
\nQUE \/STO:QMG
\n>
\nSTOP\/ACCOUNTING SHUTUP
\n22:38:30 SYSLOG — 47. Exiting
\n>
\n@LB:[1,2]SHUTUP
\n>VCP DISCONNECT \/ALL
\n>@ <EOF>
\n>
\nELI \/NOLOG
\n>
\nACS DB0:\/BLKS=0.
\nACS — Checkpoint file now inactive
\n>
\nDMO DB0:\/DEV\/LOCK=V
\nDMO — System disk being dismounted
\nDMO — SYSTEM dismounted from DB0: *** Final dismount initiated ***
\n22:38:31 *** DB0: — Dismount complete
\n>
\nSHUTUP operation complete
\nHALT instruction, PC: 126130 (CLRB @#177776)
\nsim> q<\/strong>
\nGoodbye
\n#<\/p>\n","protected":false},"excerpt":{"rendered":"

In this step, I’ll be adding Decnet support to the RSX11M-Plus installation on the RP06 disk. The software was already on the RD54 image copied in the first step, so there’s no need to mess around with tapes. Here goes: pdp11 run PDP-11 simulator V3.9-0 Disabling XQ sim> boot rp0 RSX-11M-PLUS V4.6 BL87 1024.KW System:”RSXMPL” […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":671,"menu_order":20,"comment_status":"closed","ping_status":"open","template":"","meta":{"footnotes":""},"class_list":["post-623","page","type-page","status-publish","hentry","missing-thumbnail"],"_links":{"self":[{"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/pages\/623","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/comments?post=623"}],"version-history":[{"count":0,"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/pages\/623\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/pages\/671"}],"wp:attachment":[{"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/media?parent=623"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}