{"id":652,"date":"2014-01-19T22:22:17","date_gmt":"2014-01-19T22:22:17","guid":{"rendered":"http:\/\/pdp2011.sytse.net\/wordpress\/?page_id=652"},"modified":"2014-01-19T22:22:17","modified_gmt":"2014-01-19T22:22:17","slug":"install-5","status":"publish","type":"page","link":"https:\/\/pdp2011.sytse.net\/wordpress\/pdp-11\/sessions\/rsx-11m-plus\/install-5\/","title":{"rendered":"Install 5"},"content":{"rendered":"

Only some finishing up to do now, to make the system start the network and have all the tasks inserted so as to make it work comfortably.
\n
\n# pdp11 run<\/code>
\nPDP-11 simulator V3.9-0
\nDisabling XQ
\nsim> boot rp0
\nRSX-11M-PLUS V4.6 BL87 1024.KW System:”RSXMPL”
\n>RED DB:=SY:
\n>RED DB:=LB:
\n>RED DB:=SP:
\n>MOU DB0:”RSX11MPBL87″
\n>@DB:[1,2]STARTUP
\n>; PLEASE NOTE
\n>;
\n>; If you have not yet read the system release notes, please do so
\n>; now before attempting to perform a SYSGEN or to utilize the new
\n>; features of this system.
\n>;
\nZ[c
\nSET — Inquire cannot determine terminal type
\n>;
\n>; Please ignore any random characters that may have printed on your
\n>; terminal just now. They came from a SET \/INQUIRE=TI: command.
\n>; Evidently your terminal does not recognize escape sequences.
\n>; This will not affect the running of this command file.
\n>;
\n>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: 23:07 19-jan-14<\/strong>
\n>TIME 23:07 19-jan-14
\n>ACS SY:\/BLKS=1024.
\n>CON ONLINE ALL
\n>ELI \/LOG\/LIM
\n>CLI \/INIT=DCL\/CTRLC\/DPR=”<15><12>\/$ \/”
\n>INS LB:[1,1]RMSRESAB.TSK\/RON=YES\/PAR=GEN
\n>INS LB:[1,1]RMSLBL.TSK\/RON=YES\/PAR=GEN
\n>INS LB:[1,1]RMSLBM.TSK\/RON=YES\/PAR=GEN
\n>INS $QMGCLI
\n>INS $QMGCLI\/TASK=…PRI
\n>INS $QMGCLI\/TASK=…SUB
\n>QUE \/START:QMG
\n>INS $QMGPRT\/TASK=PRT…\/SLV=NO
\n>QUE LP0:\/CR\/NM
\n>START\/ACCOUNTING
\n>CON ESTAT LP0:
\n>QUE BAP0:\/BATCH
\n>QUE BAP0:\/AS:BATCH
\n>@ <EOF>
\n>ins $edt<\/strong>
\n>bye<\/strong>
\nHave a Good Evening
\n19-JAN-14 23:07 TT0: logged off RSXMPL
\n>
\n>hello system<\/strong>
\nPassword:
\nRSX-11M-PLUS V4.6 BL87 [1,54] System RSXMPL
\n19-JAN-14 23:07 Logged on Terminal TT0: as SYS1
\nGood Evening
\n*****************************************************************
\n* *
\n* Welcome to RSX-11M-PLUS *
\n* *
\n* Version 4.6 Base level 87 *
\n* This is file LB:[1,2]LOGIN.TXT *
\n* *
\n*****************************************************************
\nLast interactive login on Sunday, January 19, 2014 15:44:09 (TT0:)
\n>edt [1,2]startup.cmd<\/strong>
\n1 .;
\n*169<\/strong>
\n169 .EXIT
\n*ins<\/strong>
\nins lb:[1,1]dblrsx\/par=gen<\/strong>
\nins $dibol83<\/strong>
\nins $dblmsgmgr<\/strong>
\nins $dblsort1<\/strong>
\nins $dblsort2<\/strong>
\nins $dblmnugen\/task=…mnu<\/strong>
\ndcl run msgmgr \/delay=1s<\/strong>
\nins lb:[3,54]f77.tsk\/task=…f77<\/strong>
\nins lb:[3,54]pdp11c.tsk\/task=…ccc<\/strong>
\nins lb:[1,1]pdppas.tsk\/task=…pas<\/strong>
\nINS LB:[1,1]BP2RES\/RON=YES\/PAR=GEN<\/strong>
\nins lb:[1,54]bp2ic2.tsk\/task=…bp2\/inc=1000<\/strong>
\nins lb:[6,3]cobol.tsk<\/strong>
\nins lb:[6,3]cblmrg.tsk<\/strong>
\nins lb:[6,3]refrmt.tsk<\/strong>
\n.sett $cex<\/strong>
\n.sett $dec<\/strong>
\n.sett $nns<\/strong>
\nasn db0:=xx:<\/strong>
\n.setf $lat<\/strong>
\n@[5,1]netins<\/strong>
\nins $edt<\/strong>
\nins $tkb<\/strong>
\n^Z<\/strong>
\n169 .EXIT
\n*ex<\/strong>
\nDB0:[1,2]STARTUP.CMD;2 197 lines
\n[m)B
\n>edt [5,1]netins.cmd<\/strong>
\n1 .;
\n*f “netxxu”<\/strong>
\n*t<\/strong>
\n75 .ASKN [1:377:’NETXX1′] NETXXU What is the network UIC group cod
\ne
\n*s\/.\/;\/<\/strong>
\n75 ;ASKN [1:377:’NETXX1′] NETXXU What is the network UIC group code
\n1 substitution
\n*ins<\/strong>
\n.setn netxxu 5<\/strong>
\n^Z<\/strong>
\n75 ;ASKN [1:377:’NETXX1′] NETXXU What is the network UIC group cod
\ne
\n*ex<\/strong>
\nDB0:[5,1]NETINS.CMD;2 246 lines
\n[m)B
\n>run $shutup<\/strong>
\nRSX-11M-PLUS Shut down program
\nEnter minutes to wait before shutdown: 0<\/strong>
\nReason for shutdown (<CR> for none):
\nOK to shutdown? [Y\/N]: y<\/strong>
\nAll further logins are disabled
\n19-JAN-14 23:11 System is now shutting down — RSXMPL
\nQUE \/STO:QMG
\n>
\nSTOP\/ACCOUNTING SHUTUP
\n23:11:41 SYSLOG — 47. Exiting
\n>
\n@LB:[1,2]SHUTUP
\n>VCP DISCONNECT \/ALL
\n>@ <EOF>
\n>
\nELI \/NOLOG
\n>
\nACS DB0:\/BLKS=0.
\nACS — Checkpoint file now inactive
\n>
\nDMO DB0:\/DEV\/LOCK=V
\nDMO — System disk being dismounted
\nDMO — SYSTEM dismounted from DB0: *** Final dismount initiated ***
\n23:11:42 *** DB0: — Dismount complete
\n>
\nSHUTUP operation complete
\nHALT instruction, PC: 126130 (CLRB @#177776)
\nsim> q
\nGoodbye
\n#<\/p>\n","protected":false},"excerpt":{"rendered":"

Only some finishing up to do now, to make the system start the network and have all the tasks inserted so as to make it work comfortably. # pdp11 run PDP-11 simulator V3.9-0 Disabling XQ sim> boot rp0 RSX-11M-PLUS V4.6 BL87 1024.KW System:”RSXMPL” >RED DB:=SY: >RED DB:=LB: >RED DB:=SP: >MOU DB0:”RSX11MPBL87″ >@DB:[1,2]STARTUP >; PLEASE NOTE […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":671,"menu_order":50,"comment_status":"closed","ping_status":"open","template":"","meta":{"footnotes":""},"class_list":["post-652","page","type-page","status-publish","hentry","missing-thumbnail"],"_links":{"self":[{"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/pages\/652","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/comments?post=652"}],"version-history":[{"count":0,"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/pages\/652\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/pages\/671"}],"wp:attachment":[{"href":"https:\/\/pdp2011.sytse.net\/wordpress\/wp-json\/wp\/v2\/media?parent=652"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}